MICROPHONE (w/o Sliding Roof) REMOVAL


  1. REMOVE ROOF TOP MOULDING


    1. A01JB5T

      Using moulding remover B, disengage the 3 claws and 2 clips, and remove the roof top moulding.

  2. REMOVE MAP LIGHT ASSEMBLY


    1. A01J98M

      Disengage the 4 clips and 2 guides as shown in the illustration.

    2. Disconnect the connector and remove the map light assembly.

  3. REMOVE THEFT WARNING RADAR SENSOR (w/ Theft Deterrent System)


    1. A01JD6K

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the 3 screws and theft warning radar sensor.

  4. REMOVE TELEPHONE MICROPHONE ASSEMBLY (w/o Theft Deterrent System)


    1. A01J94S

      Remove the 6 screws and map light base.

    2. A01JB33

      Disconnect the connector.

    3. Disengage the 2 claws and remove the telephone microphone assembly.

  5. REMOVE TELEPHONE MICROPHONE ASSEMBLY (w/ Theft Deterrent System)


    1. A01J9VB

      Remove the 6 screws and map light cover.

    2. A01JAIP

      Pull up the map light base as shown in the illustration.

    3. A01JCEL

      Disconnect the connector.

    4. Disengage the 2 claws and remove the telephone microphone assembly.