FRONT DOOR SPEAKER INSTALLATION


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    1. Using an air riveter or a hand riveter, install the front No. 1 speaker assembly with 4 new rivets.

      A01J8SEE01
      Text in Illustration
      *1 Riveter *2 Mandrel
      *a INCORRECT - -

      Note


      • Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

      • Confirm that the rivet is seated properly against the moulding. Do not tilt the riveter when installing the rivet to the moulding. Do not leave any clearance between the rivet head and moulding.

      • Do not leave any clearance between the moulding and door frame. Firmly hold the 2 items together while installing the rivet.

      Tech Tips

      If the rivet cannot be cut, pull it once and cut it.

    2. A01JB7F

      Connect the connector.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01J8S8

      Engage the 9 clips and install the front door trim board sub-assembly.

    2. Install the 2 screws.

    3. Remove the 2 pieces of protective tape.

  3. INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01JC7IE01

      Engage the claw to install the courtesy light assembly.

  4. INSTALL DOOR ARMREST COVER


    1. A01JCMQ

      Install the door armrest cover.

  5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. Connect the connector.

    2. A01JACF

      Engage the 7 claws and 3 guides, and install the power window regulator switch assembly with front door armrest base panel.

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. A01JCY6

      Connect the connector.

    2. Engage the 7 claws and 3 guides, and install the power window regulator master switch assembly with front door armrest base panel.

  7. INSTALL ASSIST GRIP COVER


    1. A01JAH9

      Engage the 6 claws, 2 clips and 3 guides, and install the assist grip cover.

  8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01JA7Z

      Engage the 3 claws and install the front door inside handle bezel plug.