STEREO COMPONENT AMPLIFIER INSTALLATION


  1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY

  2. INSTALL NO. 1 AMPLIFIER BRACKET


    1. A01JBCP

      Install the No. 1 amplifier bracket with the 2 screws.

  3. INSTALL NO. 2 AMPLIFIER INNER BRACKET


    1. A01JAFL

      Install the No. 2 amplifier inner bracket with the 2 screws.

  4. INSTALL NO. 2 AMPLIFIER OUTER BRACKET


    1. A01J9G5

      Install the No. 2 amplifier outer bracket with the 2 screws.

  5. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET


    1. A01J99V

      Install the stereo component amplifier assembly with bracket with the 2 bolts.

    2. A01J9O2

      Engage the clamp and connect the wire harness.

    3. Connect the connector.

  6. INSTALL AUDIO AMPLIFIER COVER


    1. A01J9JM

      Install the audio amplifier cover with the 2 clips.

  7. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  8. INSTALL INNER SEAT TRACK COVER RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  9. INSTALL OUTER SEAT TRACK COVER RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  10. INSTALL FRONT SEAT HEADREST ASSEMBLY RH

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. INSTALL REAR NO. 3 FLOOR BOARD


    1. A01JC33

      Engage the 2 guides to install the rear No. 3 floor board.

  13. INSTALL REAR DECK FLOOR BOX


    1. Install the rear deck floor box.

  14. INSTALL REAR NO. 2 FLOOR BOARD


    1. A01JCWRE01

      Engage the 3 guides <A>.

    2. Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.

  15. INSPECT FRONT SEAT ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  16. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.