RADIO RECEIVER REMOVAL


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01J9ZGE01
      Text in Illustration
      *a Lift slightly

      Using a moulding remover, slightly lift the panel at the position shown in the illustration.

    2. Pull the integration control and panel assembly in the direction indicated by the arrow to disengage the 6 claws.

    3. Disconnect each connector and remove the integration control and panel assembly.

  2. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01JA02

      Pull the lower center instrument cluster finish panel sub-assembly in the direction indicated by the arrow to disengage the 2 claws and 2 clips.

    2. A01JAMJ

      Pull the lower center instrument cluster finish panel sub-assembly in the direction indicated by the arrow to disengage the 5 claws and remove the lower center instrument cluster finish panel sub-assembly.

  3. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Disengage the 14 claws.

    2. Disconnect the connector and remove the instrument cluster finish panel garnish.

      A01J8FE

  4. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. A01JD4M

      Disengage the 3 claws.

    2. Disconnect the connector and remove the upper instrument panel finish panel sub-assembly.

  5. REMOVE RADIO RECEIVER WITH BRACKET


    1. A01JD1M

      Remove the 4 bolts.

    2. A01J8MZ

      Disengage the 4 claws as shown in the illustration.

    3. Disconnect each connector and remove the radio receiver with bracket.

  6. REMOVE NO. 1 RADIO BRACKET


    1. A01J8F5

      Remove the 4 bolts and No. 1 radio bracket.

  7. REMOVE NO. 2 RADIO BRACKET


    1. A01JA78

      Remove the 4 bolts and No. 2 radio bracket.

  8. REMOVE RADIO RECEIVER ASSEMBLY