INSTRUMENT PANEL SPEAKER INSTALLATION


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY


    1. A01J9Y7

      Connect the connector.

    2. Install the front No. 2 speaker assembly with the 2 bolts.

  2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. A01J8F1E01

      Engage the 2 guides and 6 claws to install the No. 1 instrument panel speaker panel sub-assembly as shown in the illustration.

  3. INSTALL FRONT PILLAR GARNISH CORNER PIECE


    1. A01JAS2

      Engage the 3 claws to install the front pillar garnish corner piece LH.

  4. INSTALL FRONT PILLAR GARNISH


    1. A01JBCIE01
      Text in Illustration
      *1 Adhesive Tape
      *2 Protective Cover
      *3 Curtain Shield Airbag Assembly

      Remove the protective cover.

    2. A01JD90E01
      Text in Illustration
      *1 Front Pillar Garnish Clip
      *2 Protective Tape

      Make sure that the front pillar garnish clip is not damaged.

      Note


      • If there is any damage, replace the garnish clip with a new one.

      • When a garnish clip is being replaced, make sure to install it in the direction shown in the illustration.

    3. Engage the claw to direction indicated by the arrow (1).

    4. Engage the 3 guides to direction indicated by the arrow (2).

    5. Turn the end of the front pillar garnish clip 90° with needle-nosed pliers and install it to the front pillar garnish LH.

      Tech Tips

      Tape the needle-nosed pliers tip before use.

    6. A01J9PB

      Engage 2 clips to install the front pillar garnish LH.