PARKING BRAKE CABLE REMOVAL


  1. REMOVE REAR WHEEL

  2. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

    Tech Tips

    Refer to the instructions for Removal of the parking brake control pedal assembly Click here.

  3. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)

    Tech Tips

    Refer to the instructions for Removal of the parking brake control pedal assembly Click here.

  4. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)


    1. A01JA27

      Remove the adjusting nut.

    2. A01JCP3

      Pull up the parking brake pedal claw.

    3. A01JBFA

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  5. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)


    1. A01JATB

      Remove the adjusting nut.

    2. A01JAUD

      Pull up the parking brake pedal claw.

    3. A01JCVY

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  6. REMOVE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY


    1. A01JB39

      Separate the No. 3 parking brake cable assembly from the No. 1 parking brake pull rod sub-assembly as shown in the illustration.

    2. Separate the No. 2 parking brake cable assembly to remove the No. 1 parking brake pull rod sub-assembly.

      Tech Tips

      Perform the same procedure as for the No. 3 parking brake cable assembly.

  7. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Tech Tips

    Refer to the instructions for Removal of the front exhaust pipe assembly Click here.

  8. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A01JCTD

      Remove the 3 nuts and front No. 2 floor heat insulator.

  9. REMOVE REAR FLOOR SIDE MEMBER COVER LH


    1. A01J8O5

      Remove the nut, 2 bolts and rear floor side member cover LH.

  10. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01JBOM

      Disengage the clamp to separate the No. 2 parking brake cable clamp.

    2. A01JBJ2E01

      Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

    3. A01JBJGE04
      Text in Illustration
      *1 No. 3 Parking Brake Cable Assembly
      *2 Clip
      *3 Offset Wrench (14 mm)

      Disconnect the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

      Tech Tips

      Insert an offset wrench (14 mm) at the base of the No. 3 parking brake cable assembly as shown in the illustration to disengage the clip. Pull out the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

    4. Remove the 5 bolts and No. 3 parking brake cable assembly.

      A01JALC

  11. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP


    1. for Separate type No. 2 parking brake cable clamp:


      1. A01JCTB

        Disengage the 2 claws to remove the No. 2 parking brake cable clamp from the No. 3 parking brake cable assembly.

    2. for One-piece type No. 2 parking brake cable clamp:


      1. Using pliers or equivalent, disconnect the No. 2 parking brake cable clamp and remove it from the No. 3 parking brake cable assembly.

        Tech Tips

        No. 2 parking brake cable clamp cannot be reused once removed. Make sure to remove it from the No. 3 parking brake cable clamp.