PARKING BRAKE PEDAL (for LHD) REMOVAL


  1. REMOVE AIR CONDITIONING UNIT

    Tech Tips

    Refer to the instructions for Removal of the air conditioning unit Click here.

  2. REMOVE FRONT SEAT ASSEMBLY LH

    Tech Tips

    Refer to the instructions for Removal of the front seat assembly Click here.

  3. REMOVE FRONT SEAT ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  4. REMOVE NO. 2 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY


    1. A01JBGY

      Remove the 4 bolts and No. 2 belt anchor reinforcement sub-assembly.

  5. REMOVE NO. 3 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY


    1. A01JCBY

      Remove the 4 bolts and No. 3 belt anchor reinforcement sub-assembly.

  6. LOOSEN ADJUSTING NUT


    1. A01JBDRE01
      Text in Illustration
      *1 Lock Nut
      *2 Adjusting Nut

      Remove the lock nut and loosen the adjusting nut.

  7. SEPARATE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY


    1. A01JCHZE01
      Text in Illustration
      *1 Turn
      *2 Hold

      Separate the No. 1 parking brake pull rod sub-assembly from the parking brake control pedal assembly as shown in the illustration.

  8. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY


    1. A01JAV0

      Remove the 5 bolts and nut, and separate the No. 1 parking brake cable assembly.

    2. Remove the clamp.

    3. A01JAL2

      Disconnect the parking brake switch connector.

    4. Disengage the wire harness clamp.

    5. A01J9KU

      Remove the bolt, 2 nuts and parking brake control pedal assembly.