NAVIGATION SYSTEM (for DVD) Parking Brake Switch Circuit

DESCRIPTION

This circuit is from the parking brake switch assembly to the navigation receiver assembly.

WIRING DIAGRAM

A01JAKHE13

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK BRAKE WARNING LIGHT


    1. Check that the brake warning light comes on when the parking brake is applied and goes off when it is released.

      OK
      The brake warning light operates as specified above.

    NG

    INSPECT PARKING BRAKE SWITCH ASSEMBLY Click here

    OK

  2. CHECK HARNESS AND CONNECTOR (PARKING BRAKE SWITCH ASSEMBLY - NAVIGATION RECEIVER)


    1. A01J9H1E31

      Disconnect the L42 navigation receiver assembly connector.

    2. A01JCCXE18

      Disconnect the A25 parking brake switch assembly connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      L42-1 (PKB) - A25-1 Always Below 1 Ω
      L42-1 (PKB) - Body ground Always 10 kΩ or higher
      Text in Illustration
      *1

      Front view of wire harness connector

      (to Navigation Receiver Assembly)
      *2

      Front view of wire harness connector

      (to Parking Brake Switch Assembly)

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

  3. INSPECT PARKING BRAKE SWITCH ASSEMBLY


    1. A01JC9HE01

      Disconnect the parking brake switch assembly connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      Switch connector - Switch body ON (When shaft is not pressed) Below 1 Ω
      Switch connector - Switch body OFF (When shaft is pressed) 10 kΩ or higher

    3. Proceed to the next step based on the inspection result.

      Result
      Result Proceed to
      OK A
      NG (for LHD) B
      NG (for RHD) C

    B

    REPLACE PARKING BRAKE SWITCH ASSEMBLY Click here

    C

    REPLACE PARKING BRAKE SWITCH ASSEMBLY Click here

    A

    REPAIR OR REPLACE HARNESS OR CONNECTOR