ROOF DRIP SIDE FINISH MOULDING (for Wagon) INSTALLATION

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

  • When installing the front roof side garnish, heat the vehicle body and front roof side garnish using a heat light.

    Standard
    Item Temperature
    Front Roof Side Garnish 20 to 30°C (68 to 86°F)
    Vehicle Body 40 to 60°C (104 to 140°F)

    Note

    Do not heat the front roof side garnish and vehicle body excessively.


  1. INSTALL FRONT ROOF SIDE GARNISH LH


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. If reusing the front roof side garnish:

      Clean the front roof side garnish.


      1. Using a heat light, heat the front roof side garnish.

      2. Remove the double-sided tape from the front roof side garnish.

      3. Wipe off any tape adhesive residue with cleaner.

      4. Apply new double-sided tape to the front roof side garnish as shown in the illustration.

        A003CTVE01
        Text in Illustration
        *1 Double-sided Tape

    3. Install the front roof side garnish.


      1. Using a heat light, heat the vehicle body and front roof side garnish.

      2. Attach the 4 clips to install the front roof side garnish.

      3. Install the 2 screws and 2 bolts.

        Torque:
        for Bolt
        5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      4. Remove the peeling paper from the face of the front roof side garnish.

        Tech Tips

        Press the front roof side garnish firmly to install it.

        A003D2HE01
        Text in Illustration
        *1 Double-sided Tape

  2. INSTALL NO. 3 ROOF SIDE GARNISH LID LH

    A003AVV

    1. Attach the 4 claws to install the No. 3 roof side garnish lid.

  3. INSTALL NO. 2 ROOF SIDE GARNISH LID LH

    A003CID

    1. Attach the 4 claws to install the No. 2 roof side garnish lid.

  4. INSTALL NO. 1 ROOF SIDE GARNISH LID LH

    A003EB1

    Tech Tips

    Use the same procedure to install the other No. 1 roof side garnish lid.


    1. Attach the 2 claws to install the No. 1 roof side garnish lid.