ROCKER PANEL MOULDING INSTALLATION

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.


  1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. Attach the 8 clips to install the body rocker panel moulding.

    2. Install the 2 screws.

      A003E1S

    3. Install the grommet and 7 retainers.

    4. Install the 3 screws.

      A003BTME01
      Text in Illustration
      *1 Grommet *2 Retainer

  2. INSTALL FRONT REAR WHEEL HOUSE PLATE LH

    A003DIW

    1. Attach the claw to install the front rear wheel house plate.

    2. Install the clip and 2 screws.