RADIATOR GRILLE INSTALLATION


  1. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

    A003D8S

    1. Attach the 8 claws to install the radiator grille.

    2. Install the 4 screws.

  2. INSTALL HOOD TO RADIATOR SUPPORT SEAL

    A003BZK

    1. Attach the 15 clips to install the radiator support seal.

  3. INSTALL FRONT BUMPER COVER

    A003BTW

    1. Attach the 10 claws to install the front bumper cover.

    2. w/ Fog Light:

      Connect the 2 fog light connectors and attach the 10 claws to install the front bumper cover.

    3. w/ Headlight Cleaner System:

      Connect the headlight cleaner hose and attach the 10 claws to install the front bumper cover.

    4. A003BMM

      Install the bolt, 2 clips and 9 screws.

    5. A003CCQE01

      Install the pin hold clip.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

      Tech Tips

      Use the same procedures for the RH side and LH side.

    6. Install the screw.

      Tech Tips

      Use the same procedures for the RH side and LH side.

  4. INSTALL RADIATOR GRILLE PROTECTOR

    A003AY7

    1. Install the 2 radiator grille protectors.

  5. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A00OKDO

      Install the radiator support opening cover with the 8 clips.

  6. INSTALL ENGINE ROOM SIDE COVER


    1. A00OJKZ

      Install the engine room side cover with the clip.