FRONT BUMPER REMOVAL


  1. PRECAUTION (for HID Headlight)

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A00ON49

      Remove the 7 clips and radiator support opening cover.

  4. REMOVE FRONT BUMPER COVER


    1. A00OLT9E01

      Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip and screw.

      Tech Tips

      Use the same procedure for both pin hold clips and screws.

    2. A00OIPJ

      Remove the 9 screws.

    3. A00OHR9

      Remove the 2 clips and 3 bolts.

    4. A00OIJ8E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper cover.

    5. A00OMZK

      Detach the 10 claws and remove the front bumper cover.

    6. w/ Fog Light:

      Disconnect the 2 fog light connectors.

    7. w/ Headlight Cleaner System:

      Disconnect the headlight washer hose, and then drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A00ONS6

      Remove the front bumper energy absorber.

  6. REMOVE HEADLIGHT ASSEMBLY LH


    1. for Halogen Headlight:

      Click here

    2. for HID Headlight:

      Click here

  7. REMOVE HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE FRONT BUMPER REINFORCEMENT


    1. A00ONBS

      w/ Dynamic Radar Cruise Control System:

      Disconnect the connector and detach the 3 clamps.

    2. A00OLYF

      Disconnect the 3 connectors and detach the 5 clamps.

    3. A00ONMR

      Remove the 8 bolts and front bumper reinforcement.

  9. REMOVE FRONT BUMPER SIDE RETAINER LH


    1. A00OK2V

      Remove the 2 screws.

    2. Detach the 3 claws and remove the front bumper side retainer.

  10. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


    1. A00OMOVE01
      Text in Illustration
      *A Type A
      *B Type B

      Remove the 3 bolts and front wheel opening extension pad.

  12. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Tech Tips

    Use the same procedure described for the LH side.