HAZARD WARNING SWITCH INSTALLATION


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    1. A010K7J

      Attach the 2 claws to install the switch.

  2. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A00OJQ9

      Connect the connector and clamp.

    2. A00ONC0

      Attach the 2 clips and hook.

    3. A00OK2B

      Attach the 6 clips.

    4. Attach the 3 claws and 3 hooks to install the panel register.

  3. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. A00OM2F

      Attach the 4 clips and 5 claws to install the panel end.

  4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips and 5 claws to install the panel end.

      A00OME5E01

  5. INSTALL NO. 3 BOX PANEL


    1. When replacing the No. 3 box panel with a new one:


      1. A010LS3E01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. Attach the 6 clips to install the box panel.

      A010HDEE01

  6. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A00OJ4PE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  7. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A00OMUOE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.