HAZARD WARNING SWITCH INSTALLATION


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY


    1. A003AWX

      Attach the 2 claws to install the switch.

  2. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A00DT2Z

      Connect the connector and clamp.

    2. A00DTDG

      Attach the 2 clips and hook.

    3. A00DQNA

      Attach the 6 clips.

    4. Attach the 3 claws and 3 hooks to install the panel register.

  3. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. w/o TOYOTA Parking Assist-sensor System:


      1. Attach the 4 clips and 5 claws to install the panel end.

    2. w/ TOYOTA Parking Assist-sensor System:


      1. Connect the connector.

      2. Attach the 4 clips and 5 claws to install the panel end.

        A00DPQSE01

  4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips and 5 claws to install the panel end.

      A00DV3GE01

  5. INSTALL NO. 3 BOX PANEL (w/o Console Box Lid)


    1. When replacing the No. 3 box panel with a new one:


      1. A003DNZE01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. A003AMQ

      Attach the 6 clips to install the box panel.

  6. INSTALL NO. 3 BOX PANEL (w/ Console Box Lid)


    1. When replacing the No. 3 box panel with a new one:


      1. A00DRPJE01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. Attach the 6 clips to install the box panel.

      A00DQBOE01

  7. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A00DPNQE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  8. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A00DSWWE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.