RAIN SENSOR INSTALLATION


  1. INSTALL RAIN SENSOR


    1. Clean the surface of the windshield glass that contacts the rain sensor.

    2. When replacing the rain sensor with a new one:

      Remove the protective cover on the rain sensor.

      Note

      Do not touch the silicon mixture directly with a finger.

    3. A003DGT

      Connect the connector.

      Note

      Do not touch the silicon mixture directly with a finger.

    4. A003CCG

      Attach the 2 claws to install the rain sensor.

      Note

      Make sure that there are no air bubbles between the silicon mixture and windshield glass.

  2. INSTALL NO. 2 RAIN SENSOR COVER


    1. A003B8V

      Using a screwdriver, attach the 2 claws to install the No. 2 rain sensor cover.

  3. INSTALL NO. 1 RAIN SENSOR COVER


    1. A003DC4

      Attach the 3 claws to install the No. 1 rain sensor cover.