WASHER NOZZLE (for Front) ON-VEHICLE INSPECTION


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      OK
      Washer fluid hits the windshield in the area shown in the illustration.

      If the result is not as specified, replace the washer nozzle.

      A00OM3NE01
      Standard
      Area Specified Condition Area Specified Condition
      A 355 mm (14.0 in.) B 100 mm (3.94 in.)
      C 685 mm (37.0 in.) D 87 mm (3.43 in.)
      Text in Illustration
      *1 Ceramic Edge - -
      *a Upper Limit *b Standard
      *c Lower Limit - -
      A00OKZ4 Washer Fluid Spray Area - -