WIPER SWITCH REMOVAL

PLACE FRONT WHEELS FACING STRAIGHT AHEAD
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
- w/ Navigation System (for HDD):
  
  After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE LOWER NO. 2 STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column)
1. Detach the 4 claws and remove the lower No. 2 steering column cover.
REMOVE UPPER STEERING COLUMN COVER
Note

Removing the steering column cover in an incorrect order will cause the steering column cover to break.
1. Push the right and left sides of the lower steering column cover and detach the 4 claws.
2. Insert fingers into the service hole of the lower steering column cover to detach the claw.
  
  Tech Tips
  
  Spread the claw to detach it.
3. Detach the 2 claws and remove the lower steering column cover.
4. Detach the claw and 2 pins, and remove the upper steering column cover.
REMOVE LOWER STEERING COLUMN COVER
Note

Removing the steering column cover in an incorrect order will cause the steering column cover to break.
1. Push the right and left sides of the lower steering column cover and detach the 4 claws.
2. Insert fingers into the service hole of the lower steering column cover to detach the claw.
  
  Tech Tips
  
  Spread the claw to detach it.
3. Detach the 2 claws and remove the lower steering column cover.
4. Detach the claw and 2 pins, and remove the upper steering column cover.
REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
1. Disconnect the 2 connectors.
2. Detach the claw and remove the windshield wiper switch assembly.
  
  Note
  
  If the claw is pushed with excessive force, it may break.