OUTER REAR VIEW MIRROR DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH side and LH sides.

  • The procedures listed below are for the LH side.


  1. REMOVE OUTER MIRROR LH


    1. Rotate the mirror inward towards the vehicle.

    2. A005WBK

      While holding down the inner edge of the mirror, pull the outer edge of the mirror to detach the 3 claws and remove the mirror.

    3. A005WAN

      Disconnect the 4 connectors.

  2. REMOVE OUTER MIRROR COVER LH

    A005R65

    1. Push the cover down at the location and open the cover in the direction of the arrow in the illustration to disconnect the top of the cover from the mirror body.

    2. A005S5R

      Using a moulding remover, open the cover in the direction of the arrow in the illustration to detach the 4 claws and remove the cover from the mirror body.

      Tech Tips

      Apply protective tape to the mirror body and mirror cover as shown in the illustration to prevent them from being damaged.

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. A003DSA

      Using a T10 "TORX" socket wrench, remove the 2 screws.

    2. A003CZK

      Detach the 2 claws and remove the side turn signal light.

    3. Disconnect the connector.