BACK DOOR OPENER SWITCH INSTALLATION


  1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY


    1. A003DKT

      Connect the connector and install the back door opener switch.

  2. INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE


    1. Attach the clip to install the back door outside garnish.

    2. Install the back door outside garnish with the 5 nuts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    1. A00ONB5

      Attach the 14 clips to install the back door trim board.

  4. INSTALL BACK DOOR SIDE GARNISH LH


    1. A00OHU3

      Attach the 2 clips and claw to install the back door side garnish.

  5. INSTALL BACK DOOR SIDE GARNISH RH


    1. A00OKRN

      Attach the 2 clips and claw to install the back door side garnish.

  6. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY


    1. A00ONFV

      Attach the 4 clips to install the upper back door trim panel