BACK DOOR OPENER SWITCH REMOVAL


  1. REMOVE UPPER BACK DOOR TRIM PANEL ASSEMBLY


    1. A00ONFV

      Detach the 4 clips and remove the back door trim panel.

  2. REMOVE BACK DOOR SIDE GARNISH LH


    1. A00OHU3

      Detach the 2 clips and claw, and remove the back door side garnish.

  3. REMOVE BACK DOOR SIDE GARNISH RH


    1. A00OKRN

      Detach the 2 clips and claw, and remove the back door side garnish.

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    1. A00ONB5

      Detach the 14 clips and remove the back door trim board.

  5. REMOVE BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE


    1. A00OL0V

      Remove the 5 nuts.

    2. A00ONBNE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the back door outside garnish.

    3. Detach the clip and remove the back door outside garnish.

  6. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY


    1. A003DKT

      Disconnect the connector and remove the back door opener switch.