REMOVE BOX BOTTOM PANEL
Detach the 4 claws and remove the panel.
REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
Place protective tape as shown in the illustration.
Using a moulding remover B, detach the 14 claws.
The panel is easier to remove by detaching the claws from the bottom to the top.
REMOVE REAR CONSOLE ARMREST LID
Remove the 2 E-rings.
Remove the 2 shafts.
Detach the lock and remove the armrest lid.
REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Remove the 2 screws.
Detach the 4 hooks and remove the lock.
REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY
Using a T20 "TORX" socket wrench, remove the 4 "TORX" screws and cup holder.