OCCUPANT DETECTION SENSOR DISASSEMBLY


  1. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)


    1. A00OLYNE01
      Text in Illustration
      *1 Protective Tape

      Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE FRONT SEAT CUSHION SHIELD RH (for Manual Seat)


    1. A00OHW8

      Detach the 2 rubber bands.

    2. A00ONR0

      Remove the 2 screws.

    3. Detach the hook and claw and remove the front seat cushion shield LH.

    4. A00OIA6

      w/ Lumbar Support:

      Disconnect the connector.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB (for Power Seat)


    1. A00OMTGE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape around the front seat cushion shield LH.

    2. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)


    1. A00OHTYE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE FRONT SEAT CUSHION SHIELD WITH FRONT SEAT INNER NO. 1 CUSHION SHIELD (for Power Seat)


    1. A00OLOL

      Detach the 2 rubber bands.

    2. A00OIUO

      Remove the 2 screws and detach the 2 claws.

    3. A00OIYK

      Remove the 2 screws.

    4. Pull the front seat cushion shield LH to detach the hook and remove the front seat cushion shield LH with front seat No. 1 inner cushion shield.

    5. A00OMVA

      for Driver Side:

      Disconnect the connector.

  6. REMOVE FRONT POWER SEAT SWITCH (for Power Seat)


    1. A00OM6W

      Disconnect the connector.

    2. Remove the 3 screws and front power seat switch.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH


    1. for Driver Side:

      Disconnect the connector and detach the clamps.

    2. for Passenger Side:

      Disconnect the connectors and detach the clamps.

    3. A003CGA

      Remove the nut and front seat inner belt.

  8. REMOVE FRONT SEAT INNER CUSHION SHIELD RH


    1. A00OHW8

      Detach the 2 rubber bands.

    2. A00ONR0

      Remove the 2 screws.

    3. Detach the hook and claw and remove the front seat cushion shield LH.

    4. A00OIA6

      w/ Lumbar Support:

      Disconnect the connector.

  9. REMOVE SEAT CUSHION COVER WITH PAD


    1. A00OIV1

      Remove the spring.

    2. A00OHRA

      Using a 15 mm socket wrench, remove the nut and reclining handle.

    3. for Driver Side:


      1. A00ONF6E01
        Text in Illustration
        *1 Connector Link

        Remove the clip and disconnect the connector link.

      2. A00OI7AE01
        Text in Illustration
        *1 Protective Tape

        Using a screwdriver, detach the 2 claws and remove the vertical adjuster handle bracket with connector link.

        Tech Tips

        Tape the screwdriver tip before use.

    4. w/ Seat Heater System:


      1. A00OLYG

        Cut off the cable tie.

      2. A00OI5P

        Disconnect the connector.

    5. A00OLIT

      for Front Passenger Side:

      Detach the 2 hooks and disconnect the connector holder.

    6. A00OKBS

      w/ Lumbar Support:

      Detach the wire harness clamp.

    7. w/ Seat Heater System:

      Disconnect the connector.

      A00ONV2E01
      Text in Illustration
      *A w/ Seat Heater System - -

    8. Detach the hooks and remove the seat cushion cover with pad.

  10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A00OKGP

      Detach the hooks and remove the separate type front seat cushion cover from the separate type front seat cushion pad.

      Note

      w/ Seat Heater System:

      • As the front seat cushion heater assembly is affixed to the separate type front seat cushion pad, do not remove the front seat cushion heater assembly from the separate type front seat cushion pad.

      • When replacing either the front seat cushion heater assembly or separate type front seat cushion pad due to a malfunction, be sure to replace both of them with new parts.