FRONT SEAT CUSHION HEATER (for Manual Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (for Driver Side)


    1. A00OK7DE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 3 claws and remove the vertical seat adjuster knob cap.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE VERTICAL ADJUSTING HANDLE LH (for Driver Side)


    1. A00OMVH

      Remove the 2 screws and vertical adjusting handle LH.

  4. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A00OLYNE01
      Text in Illustration
      *1 Protective Tape

      Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE FRONT SEAT CUSHION SHIELD LH


    1. A00OHW8

      Detach the 2 rubber bands.

    2. A00ONR0

      Remove the 2 screws.

    3. Detach the hook and claw and remove the front seat cushion shield LH.

    4. A00OIA6

      w/ Lumbar Support:

      Disconnect the connector.

  6. REMOVE FRONT SEAT INNER CUSHION SHIELD LH


    1. A00OMPQE01
      Text in Illustration
      *1 Hook
      *2 Wire Harness Clamp

      Remove the 2 screws.

    2. Detach the hook and wire harness clamp and remove the front seat inner cushion shield LH.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    1. for Driver Side:

      Disconnect the connector and detach the clamps.

    2. for Passenger Side:

      Disconnect the connectors and detach the clamps.

    3. A003CGA

      Remove the nut and front seat inner belt.

  8. REMOVE SEAT CUSHION COVER WITH PAD


    1. A00OIV1

      Remove the spring.

    2. A00OHRA

      Using a 15 mm socket wrench, remove the nut and reclining handle.

    3. for Driver Side:


      1. A00ONF6E01
        Text in Illustration
        *1 Connector Link

        Remove the clip and disconnect the connector link.

      2. A00OI7AE01
        Text in Illustration
        *1 Protective Tape

        Using a screwdriver, detach the 2 claws and remove the vertical adjuster handle bracket with connector link.

        Tech Tips

        Tape the screwdriver tip before use.

    4. w/ Seat Heater System:


      1. A00OLYG

        Cut off the cable tie.

      2. A00OI5P

        Disconnect the connector.

    5. A00OLIT

      for Front Passenger Side:

      Detach the 2 hooks and disconnect the connector holder.

    6. A00OKBS

      w/ Lumbar Support:

      Detach the wire harness clamp.

    7. w/ Seat Heater System:

      Disconnect the connector.

      A00ONV2E01
      Text in Illustration
      *A w/ Seat Heater System - -

    8. Detach the hooks and remove the seat cushion cover with pad.

  9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A00OKGP

      Detach the hooks and remove the cushion cover.

      Note


      • As the front seat cushion heater assembly is affixed to the separate type front seat cushion pad, do not remove the front seat cushion heater assembly from the separate type front seat cushion pad.

      • When replacing either the front seat cushion heater assembly or separate type front seat cushion pad due to a malfunction, be sure to replace both of them with new parts.