AIRBAG CUT-OFF SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A00OKIM

      Attach the 2 claws to install the cutoff switch cylinder.

  2. INSTALL INSTRUMENT SIDE PANEL RH


    1. A00OM2F

      Attach the 4 clips and 5 claws to install the panel end.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL RADIATOR SUPPORT OPENING COVER


    1. A00OKW2

      Install the radiator support opening cover with the 7 clips.

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.