STEERING PAD INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL STEERING PAD


    1. A00OTCW

      Support the steering pad with one hand.

    2. Connect the connector to the steering pad.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    3. Connect the horn connector.

    4. Attach the 2 springs to install the steering pad.

  2. INSTALL LOWER NO. 3 STEERING WHEEL COVER


    1. A00OUQ6

      Attach the 2 claws to install the steering wheel cover.

  3. INSTALL LOWER NO. 2 STEERING WHEEL COVER


    1. A00ORDTE01
      Text in Illustration
      *1 w/o Cruise Control System
      *2 w/ Cruise Control System

      Attach the 2 claws to install the steering wheel cover.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.