STEERING PAD INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL STEERING PAD


    1. A003BC1

      Support the steering pad with one hand.

    2. Connect the connector to the steering pad.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    3. Connect the horn connector.

    4. Attach the 2 springs to install the steering pad.

  2. INSTALL LOWER NO. 3 STEERING WHEEL COVER


    1. A003DD4

      Attach the 2 claws to install the steering wheel cover.

  3. INSTALL LOWER NO. 2 STEERING WHEEL COVER


    1. A003E2XE01
      Text in Illustration
      *1 w/o Cruise Control System
      *2 w/ Cruise Control System

      Attach the 2 claws to install the steering wheel cover.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL ENGINE ROOM SIDE COVER


    1. A00OJKZ

      Install the engine room side cover with the clip.

  6. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.