DOOR COURTESY LIGHT INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL COURTESY LIGHT BULB


    1. A005VDO

      Install the bulb.

    2. Attach the 3 claws to install the cover.

  2. INSTALL COURTESY LIGHT ASSEMBLY


    1. A005WA4

      Attach the 2 claws to install the light.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A00OUS2

      for Manual Seat:

      Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

    2. for Power Seat:


      1. A00OR34

        Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

      2. Connect the connector.

      3. A00OR1R

        Attach the wire harness.

    3. A00OQM8

      Attach the front door trim board with the 5 claws of the front door inner glass weatherstrip.

    4. Connect the courtesy light connector.

    5. A00OSKN

      Attach the 2 claws and 10 clips to install the trim board.

    6. Install the 3 screws.

  4. INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION


    1. Install the front door No. 1 stiffener cushion.

  5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A003DEV

      Attach the 2 claws to install the regulator switch.

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)


    1. A00OJKQE01
      Text in Illustration
      *1 w/ Rear Door Power Window
      *2 w/o Rear Door Power Window

      w/ Rear Door Power Window:


      1. Attach the 4 claws to install the master switch assembly.

      2. Install the 3 screws.

    2. w/o Rear Door Power Window:


      1. Install the master switch assembly with the 3 screws.

  7. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Tech Tips

    Use the same procedure described for the driver side.

  8. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    A00OQFLE01

    1. Connect the connector.

    2. Attach the 7 claws and clip to install the front armrest base panel.

  9. INSTALL ASSIST GRIP COVER LH


    1. A00OUW9

      Attach the 9 claws to install the assist grip cover.

  10. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    1. A00OS81

      Attach the 3 claws to install the inside handle bezel plug.