SECURITY HORN ASSEMBLY (for Sedan) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL SELF POWER SIREN ASSEMBLY


    1. A003AWS

      Install the self power siren with the 2 nuts.

    2. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. A00DRBK

      Install the trim cover with the 4 clips.

  3. INSTALL REAR FLOOR FINISH PLATE


    1. A00DQPN

      Attach the 4 clips to install the rear floor finish plate.

    2. A00DPVX

      Install the 2 clips.

  4. INSTALL ROPE HOOK ASSEMBLY


    1. A00DQ4Z

      Install the 4 rope hooks with the 4 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }
  5. INSTALL REAR NO. 6 FLOOR BOARD SPACER

    A00DSNXE01
  6. INSTALL REAR FLOOR BOARD SPACER

    A00DS4UE01
  7. INSTALL LUGGAGE COMPARTMENT FLOOR CARPET

    A00DV1K
  8. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    A003CGQE01

    1. Attach the 2 rear hooks of the seat cushion to the seatback.

    2. Attach the 2 front hooks to install the seat cushion.

    3. Confirm that the seat cushion is firmly installed.

      Note

      When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.