SECURITY HORN ASSEMBLY (for Sedan) REMOVAL


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    A003ATB

    1. Detach the 2 front hooks of the seat cushion from the vehicle body.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat for the other hook.

    2. Detach the 2 rear hooks of the seat cushion from the seatback.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  3. REMOVE LUGGAGE COMPARTMENT FLOOR CARPET

    A00DV1K

  4. REMOVE REAR FLOOR BOARD SPACER

    A00DS4UE01

  5. REMOVE REAR NO. 6 FLOOR BOARD SPACER

    A00DSNXE01

  6. REMOVE ROPE HOOK ASSEMBLY


    1. A00DQ4Z

      Remove the 4 bolts and 4 rope hooks.

  7. REMOVE REAR FLOOR FINISH PLATE


    1. A00DPVX

      Remove the 2 clips.

    2. A00DQPN

      Detach the 4 clips and remove the finish plate.

  8. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. A00DRBK

      Using a clip remover, remove the 4 clips and luggage compartment trim cover.

  9. REMOVE SELF POWER SIREN ASSEMBLY


    1. A003AWS

      Disconnect the connector.

    2. Remove the 2 nuts and self power siren.