ULTRASONIC SENSOR INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER


    1. for Wagon:


      1. A00OIFF

        Attach the claw to the rear bumper cover to install the No. 3 ultrasonic sensor retainer.

    2. for Sedan:


      1. A00OM8R

        Attach the claw to the rear bumper cover to install the No. 3 ultrasonic sensor retainer.

  2. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER


    1. for Wagon:

      Tech Tips

      Use the same procedure for both No. 2 ultrasonic sensor retainers.


      1. A00OLQP

        Attach the 2 claws to the rear bumper cover to install the No. 2 ultrasonic sensor retainer.

    2. for Sedan:

      Tech Tips

      Use the same procedure for both No. 2 ultrasonic sensor retainers.


      1. A00OM8R

        Attach the claw to the rear bumper cover to install the No. 2 ultrasonic sensor retainer.

  3. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    1. A00OIFF

      for Wagon:

      Attach the claw to the rear bumper cover to install the No. 1 ultrasonic sensor retainer.

    2. A00OI6E

      for Sedan:

      Attach the claw to the rear bumper cover to install the No. 1 ultrasonic sensor retainer.

  4. INSTALL ULTRASONIC SENSOR CLIP (for Center)


    1. A00OL2B

      for Wagon:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

      Tech Tips

      Use the same procedure for the other ultrasonic sensor clip.

    2. A00OJEE

      for Sedan:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

      Tech Tips

      Use the same procedure for the other ultrasonic sensor clip.

  5. INSTALL ULTRASONIC SENSOR CLIP (for RH Side and LH Side)


    1. A00OL2B

      for Wagon:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

    2. for Sedan:

      Attach the ultrasonic sensor clip to the ultrasonic sensor retainer from the backside of the bumper. Then attach the 2 claws of the clip to install the clip.

      A00OKSEE01
      Text in Illustration
      *A for RH Side *B for LH Side

  6. INSTALL NO. 1 ULTRASONIC SENSOR


    1. for Wagon:

      Tech Tips

      Use the same procedure for all No. 1 ultrasonic sensors.


      1. A00OMNE

        Attach the No. 1 ultrasonic sensor to the ultrasonic sensor clip from the backside of the bumper. Then attach the 2 claws of the sensor to install the sensor.

      2. A00OMQU

        Connect the connector.

      3. A00OIZ7

        Attach the 2 clamps.

    2. for Sedan:


      1. A00OIGP

        for RH Side:

        Attach the No. 1 ultrasonic sensor to the ultrasonic sensor clip from the backside of the bumper. Then attach the 2 claws of the sensor to install the sensor.

      2. A00OKRI

        except RH Side:

        Tech Tips

        Use the same procedure for all No. 1 ultrasonic sensors.

        Attach the No. 1 ultrasonic sensor to the ultrasonic sensor clip from the backside of the bumper. Then attach the 2 claws of the sensor to install the sensor.

      3. A00OL44E01
        Text in Illustration
        *1 for RHD
        *1 for LHD

        Attach the 3 clamps.

  7. INSTALL REAR BUMPER COVER (for Sedan)


    1. Install the rear bumper cover Click here.

  8. INSTALL REAR BUMPER COVER (for Wagon)


    1. Install the rear bumper cover Click here.