NAVIGATION ECU REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A00OKW2

      Remove the 7 clips and radiator support opening cover.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY

    Click here

  5. REMOVE NO. 1 RADIO RECEIVER BRACKET


    1. A00OJ3T

      Remove the 5 screws and No. 1 radio receiver bracket.

  6. REMOVE NO. 2 RADIO RECEIVER BRACKET


    1. A00OI66

      Remove the 5 screws and No. 2 radio receiver bracket.

  7. REMOVE EXTENSION MODULE


    1. A00OHTS

      Disconnect the 5 connectors and remove the navigation wire.

    2. Disconnect the connector and remove the extension module.

    3. A00OLNP

      Detach the clamp.

    4. Disconnect the connector and remove the antenna cord.