NAVIGATION RECEIVER (for DVD) INSTALLATION


  1. INSTALL NO. 2 RADIO BRACKET


    1. A003ANX

      Install the bracket with the 3 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  2. INSTALL NO. 1 RADIO BRACKET


    1. A003BB1

      Install the bracket with the 3 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  3. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET


    1. Connect the connectors.

    2. A003E5J

      Insert the navigation receiver.

      Note

      When inserting the navigation receiver, do not press the knobs on the navigation receiver.

    3. A003B5C

      Install the navigation receiver with the 4 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  4. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY WITH FINISH PANEL (for Audio-less, DVD Navigation System)


    1. A00DT2Z

      Connect the connector and clamp.

    2. A00DTDG

      Attach the 2 clips and hook.

    3. A00DQNA

      Attach the 6 clips.

    4. Attach the 3 claws and 3 hooks to install the panel register.

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for RHD)


    1. w/o TOYOTA Parking Assist-sensor System:


      1. Attach the 4 clips and 5 claws to install the panel end.

    2. w/ TOYOTA Parking Assist-sensor System:


      1. Connect the connector.

      2. Attach the 4 clips and 5 claws to install the panel end.

        A00DPQSE01

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)


    1. A00DUWJ

      Attach the 4 clips and 5 claws to install the panel end.

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips and 5 claws to install the panel end.

      A00DV3GE01

  8. INSTALL NO. 3 BOX PANEL (w/ Console Box Lid)


    1. When replacing the No. 3 box panel with a new one:


      1. A00DRPJE01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. Attach the 6 clips to install the box panel.

      A00DQBOE01

  9. INSTALL NO. 3 BOX PANEL (w/o Console Box Lid)


    1. When replacing the No. 3 box panel with a new one:


      1. A003DNZE01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. A003AMQ

      Attach the 6 clips to install the box panel.

  10. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A00DPNQE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  11. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A00DSWWE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  13. INSTALL ENGINE ROOM SIDE COVER


    1. A00OJKZ

      Install the engine room side cover with the clip.