NAVIGATION SYSTEM (for HDD) The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK CELLULAR PHONE


    1. Check if the other side can hear your voice properly.

      OK
      Your voice can be heard correctly.

    NG

    CELLULAR PHONE IS FAULTY

    OK

  2. CHECK SETTINGS


    1. A003DOSE02

      Check if the mute switch is set to on.

      OK
      Mute switch is not set to on.

    NG

    TURN MUTE SWITCH OFF

    OK

  3. CHECK MICROPHONE


    1. A003BGOE01
      Text in Illustration
      *1 Microphone Input Level Meter
      *2 Recording Switch
      *3 Stop Switch
      *4 Play Switch
      *5 Recording Indicator

      Enter the "Microphone&Voice Recognition Check" mode Click here.

    2. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

    3. Push the recording switch and perform voice recording.

      Tech Tips

      Voice can be recorded for up to 5 seconds.

    4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

      OK
      All check results are normal.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE NAVIGATION RECEIVER ASSEMBLY Click here