NAVIGATION SYSTEM (for HDD) Illumination for Panel Switch does not Come on with Tail Switch ON

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK VEHICLE SIGNAL


    1. A003C02E03

      Enter the "Function Check/Setting" mode and select "Vehicle Signal" Click here.

    2. Check that the display changes between ON and OFF according to the light control switch operation.

      OK
      Light Control Switch Condition Display Condition
      TAIL or HEAD ON
      OFF OFF

      Tech Tips

      This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.


    NG

    GO TO "Illumination Circuit" Click here

    OK

    REPLACE NAVIGATION RECEIVER ASSEMBLY Click here