DESCRIPTION
This DTC is stored when a malfunction occurs in a connected device.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1585 | Either condition is met.
|
|
INSPECTION PROCEDURE
Tech Tips
After the inspection is completed, clear the DTCs.
PROCEDURE
REPLACE USB DEVICE OR "iPod"
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the ignition switch off.
Tech Tips
When one of these DTCs has been stored, it is necessary to turn off the ignition switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the ignition switch to ACC.
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
Tech Tips
If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
Refer to System Description for compatible formats and versions Click here.
| NEXT |
|
CHECK DTC
Clear the DTCs Click here.
Recheck for DTCs and check if the same DTC is output again.
| OK |
|---|
| No DTCs are output. |
| NG |
|
REPLACE EXTENSION MODULE Click here |
| OK |
|
USB DEVICE FORMAT IS INCOMPATIBLE, "iPod" VERSION IS INCOMPATIBLE, OR USB DEVICE OR "iPod" IS DEFECTIVE