DIGITAL AUDIO BROADCASTING ANTENNA (for Sedan) REMOVAL


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    A003ATB

    1. Detach the 2 front hooks of the seat cushion from the vehicle body.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat for the other hook.

    2. Detach the 2 rear hooks of the seat cushion from the seatback.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    A003CVN

    1. Remove the bolt and disconnect the rear seat 3 point type belt anchor.

    2. A003AHX

      Using a screwdriver, detach the claw to open the cap of the rear seat shoulder belt guide.

    3. Remove the seat belt from the belt guide.

    4. A003CZ2E01

      Remove the bolt, and then remove the side seatback LH as shown in the illustration.

  3. REMOVE INNER ROOF SIDE GARNISH LH

    A010L0SE01
    Text in Illustration
    *1 Clip A

    1. Detach the 5 clips and remove the inner roof side garnish.

      Tech Tips

      The 2 clips labeled A remain attached to the body.

    2. Remove the 2 clips labeled A from the vehicle body.

  4. REMOVE DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY


    1. Disconnect each connector.

    2. A010KYK

      Remove the bolt and digital audio broadcasting antenna assembly.