STEREO JACK ADAPTER ASSEMBLY INSTALLATION


  1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. A010LA2

      Attach the 2 claws to install the stereo jack adapter.

  2. INSTALL BOX BOTTOM PANEL


    1. A010LWH

      Attach the 4 claws to install the box bottom panel.

  3. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transaxle and CVT)


    1. A010JH2

      Connect the connector.

    2. Attach the 2 claws and 6 clips to install the console panel.

  4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)


    1. A010K71

      Attach the 2 claws and 6 clips to install the console panel.

    2. A010KDA

      Attach the cover to the shaft.

  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle and CVT)


    1. A010LKB

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    1. A010LOW

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for RHD)


    1. w/o TOYOTA Parking Assist-sensor System:


      1. Attach the 4 clips and 5 claws to install the panel end.

    2. w/ TOYOTA Parking Assist-sensor System:


      1. Connect the connector.

      2. Attach the 4 clips and 5 claws to install the panel end.

        A00OI5CE01

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)


    1. A00OM2F

      Attach the 4 clips and 5 claws to install the panel end.

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips and 5 claws to install the panel end.

      A00OME5E01

  10. INSTALL NO. 3 BOX PANEL


    1. When replacing the No. 3 box panel with a new one:


      1. A010LS3E01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. Attach the 6 clips to install the box panel.

      A010HDEE01

  11. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


    1. A00OJ4PE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  12. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A00OMUOE01
      Text in Illustration
      *1 Guide
      *2 Clamp

      Attach the guide near the front of the vehicle.

    2. Attach the clamp.

    3. Attach the 2 clips and 5 claws to install the finish panel.

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.