STEREO COMPONENT AMPLIFIER REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A00DSOB

      Remove the clip and engine room side cover.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • w/ Navigation System (for HDD):

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT SEAT ASSEMBLY RH


    1. for Manual Seat:

      Remove the front seat assembly RH Click here.

    2. for Power Seat:

      Remove the front seat assembly RH Click here.

  4. REMOVE AMPLIFIER COVER


    1. A003CUP

      Detach the 2 clips and remove the cover.

  5. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET


    1. A003BEX

      Detach the clamp.

    2. Disconnect the connector.

    3. Remove the 2 bolts and amplifier with bracket.