MULTIPLEX TILT AND TELESCOPIC ECU REMOVAL


  1. REMOVE STEERING WHEEL ASSEMBLY


    1. Remove the steering wheel assembly Click here.

  2. REMOVE LOWER NO. 2 STEERING COLUMN COVER

    A00OMND

    1. Detach the 4 claws and remove the lower No. 2 steering column cover.

  3. REMOVE STEERING COLUMN COVER


    1. A00OKTN

      Detach the claw and 2 pins, and remove the upper steering column cover.

  4. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

    A005U68

    1. Remove the nut and multiplex tilt and telescopic ECU from the steering column assembly.

    2. Disconnect the 2 connectors and wire harness clamp.