STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) DISASSEMBLY

Note

When using a vise, do not overtighten it.


  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Secure the steering column assembly in a vise.

    2. Using a center punch, mark the center of the 2 tapered-heads bolts.

    3. Using a 3 to 4 mm (0.12 to 0.16 in.) diameter drill bit, drill a hole in the 2 tapered-head bolts.

    4. A005UKVE01
      Text in Illustration
      *1 Screw Extractor

      Using a screw extractor, remove the 2 tapered-head bolts, and then remove the steering lock actuator assembly from the steering column assembly.