ELECTRIC PARKING BRAKE SYSTEM, Diagnostic DTC:C1201/64

DTC Code DTC Name
C1201/64 Engine Control System Malfunction

DESCRIPTION

When the electric parking brake ECU receives an engine control system malfunction signal, this DTC is stored.

DTC Code DTC Detection Condition Trouble Area
C1201/64 The safety critical CAN signals from the ECM for the electric parking brake control cycle are consecutively set to failure for a specified time.

  • Engine control system

  • Electric parking brake ECU (Parking brake with bracket actuator assembly)

INSPECTION PROCEDURE

Note


  • Before performing work, turn the ignition switch off and wait approximately 20 seconds to make sure that the parking brake cannot operate.

  • When replacing the parking brake with bracket actuator assembly, perform zero point calibration Click here.

PROCEDURE


  1. CHECK ENGINE TYPE


    1. Check the engine type.

      Result
      Result Proceed to
      1ZR-FAE A
      2ZR-FAE B
      3ZR-FAE C
      3ZR-FE D

    B

    CHECK ENGINE CONTROL SYSTEM Click here

    C

    CHECK ENGINE CONTROL SYSTEM Click here

    D

    CHECK ENGINE CONTROL SYSTEM Click here

    A

  2. CHECK ENGINE CONTROL SYSTEM


    1. Check if an engine control system DTC is output Click here.

      Result
      Result Proceed to
      DTC is output. A
      DTC is not output. B

    B

    RECONFIRM DTC Click here

    A

    GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here

  3. CHECK ENGINE CONTROL SYSTEM


    1. Check if an engine control system DTC is output Click here.

      Result
      Result Proceed to
      DTC is output. A
      DTC is not output. B

    B

    RECONFIRM DTC Click here

    A

    GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here

  4. CHECK ENGINE CONTROL SYSTEM


    1. Check if an engine control system DTC is output Click here.

      Result
      Result Proceed to
      DTC is output. A
      DTC is not output. B

    B

    RECONFIRM DTC Click here

    A

    GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here

  5. CHECK ENGINE CONTROL SYSTEM


    1. Check if an engine control system DTC is output Click here.

      Result
      Result Proceed to
      DTC is output. A
      DTC is not output. B

    B

    RECONFIRM DTC Click here

    A

    GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here

  6. RECONFIRM DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC C1201/64 is output. A
      DTC C1201/64 is not output. B

    B

    USE SIMULATION METHOD TO CHECK Click here

    A

    REPLACE PARKING BRAKE WITH BRACKET ACTUATOR ASSEMBLY Click here