FRONT SPEED SENSOR REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT FENDER LINER LH


    1. A003E4AE01

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    2. A003CAP

      Remove the 6 screws from the fender liner.

    3. A003E2G

      Remove the 5 grommets from the fender liner.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

    4. Remove the 8 clips and fender liner.

  3. REMOVE FRONT SPEED SENSOR LH


    1. A005SB7

      Detach the connector clip.

    2. Disconnect the connector.

    3. A005TLN

      Detach the sensor clip and remove the bolt and sensor clamp.

    4. A005SCM

      Detach the sensor clip and remove the bolt and sensor clamp.

    5. A005ULQ

      Remove the bolt and front speed sensor from the knuckle.

      Note

      Keep the sensor tip and sensor installation hole free from foreign matter.