REAR AXLE HUB REMOVAL

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.


  1. REMOVE REAR WHEEL

  2. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY LH


    1. Remove the rear disc brake cylinder assembly LH Click here.

  3. REMOVE REAR DISC


    1. A00ONLDE01
      Text in Illustration
      *1 Matchmark

      Place matchmarks on the disc and axle hub.

    2. Remove the rear disc.

  4. DISCONNECT SKID CONTROL SENSOR WIRE


    1. A005W3S

      Disconnect the connector.

  5. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH


    1. A005WL5

      Remove the 4 bolts and the rear axle hub and bearing assembly.