ELECTRICAL KEY OSCILLATOR (for Center Floor) REMOVAL


  1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    A003ATB

    1. Detach the 2 front hooks of the seat cushion from the vehicle body.

      Note

      Follow the instructions below carefully as the cushion frame deforms easily.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

      2. Repeat for the other hook.

    2. Detach the 2 rear hooks of the seat cushion from the seatback.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE INDOOR NO. 2 ELECTRICAL KEY OSCILLATOR


    1. A003C0OE01
      Text in Illustration
      *1 Front Floor Carpet

      Remove the clip and fold back the front floor carpet assembly.

    2. A003DID

      Disconnect the connector.

    3. Remove the bolt and electrical key oscillator.