FRONT DRIVE SHAFT ASSEMBLY (for 1ZR-FAE, 2ZR-FAE) INSPECTION


  1. INSPECT FRONT DRIVE SHAFT


    1. A005W0H

      Check that there is no severe play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no severe play in the radial direction of the inboard joint.

    4. Check the 2 boots for damage.

    5. A005U27E10

      Check that the 2 boots are not stretched or contracted when the drive shaft is at the standard length.

      Dimension (A)
      for LH Side for RH Side
      603.28 mm (23.8 in.) 886.28 mm (34.9 in.)

      If the boots are stretched or contracted, correct them.