PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A0053UDE04
    Text in Illustration
    *1

    Component without harness connected

    (Park/Neutral Position Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      • 1 (RB) - 3 (PL)

      • 4 (B) - 9 (L)

      		 Shift lever in P Below 1 Ω
      1 (RB) - 2 (RL) Shift lever in R Below 1 Ω

      • 1 (RB) - 8 (NL)

      • 4 (B) - 9 (L)

      		 Shift lever in N Below 1 Ω
      1 (RB) - 7 (DL) Shift lever in D, M, "+" or "-" Below 1 Ω

      • 1 (RB) - 3 (PL)

      • 4 (B) - 9 (L)

      		 Shift lever not in P 10 kΩ or higher
      1 (RB) - 2 (RL) Shift lever not in R 10 kΩ or higher

      • 1 (RB) - 8 (NL)

      • 4 (B) - 9 (L)

      		 Shift lever not in N 10 kΩ or higher
      1 (RB) - 7 (DL) Shift lever not in D, M, "+" or "-" 10 kΩ or higher

      If the result is not as specified, replace the park/neutral position switch.