FRONT DRIVE SHAFT ASSEMBLY (for 3ZR-FE, 3ZR-FAE) INSPECTION


  1. INSPECT FRONT DRIVE SHAFT


    1. A00OIGQ

      Check that there is no severe play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no severe play in the radial direction of the inboard joint.

    4. Check the 2 boots for damage.

    5. A00OJ9VE01
      Text in Illustration
      *1 for LH Side
      *2 for RH Side

      Check that the 2 boots are not stretched or contracted when the drive shaft is at the standard length.

      Dimension (A)
      Item Dimension
      for LH side 591.1 mm (23.3 in.)
      for RH side 888.1 mm (35.0 in.)

      If the boots are stretched or contracted, correct them.