FRONT DRIVE SHAFT ASSEMBLY (for 1AZ-FE, 3ZR-FE, 3ZR-FAE) INSPECTION


  1. INSPECT FRONT DRIVE SHAFT


    1. A005W0H

      Check that there is no severe play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no severe play in the radial direction of the inboard joint.

    4. Check the 2 boots for damage.

    5. A005UM6E01
      Text in Illustration
      *1 for LH Side
      *2 for RH Side

      Check that the 2 boots are not stretched or contracted when the drive shaft is at the standard length.

      Dimension (A)
      Engine Type Item Dimension
      3ZR-FAE and 3ZR-FE for LH side 591.1 mm (23.3 in.)
      for RH side 888.1 mm (35.0 in.)
      1AZ-FE for LH side 581.1 mm (22.9 in.)
      for RH side 900.1 mm (35.4 in.)

      If the boots are stretched or contracted, correct them.