PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. REMOVE FRONT LOWER BUMPER ABSORBER


    1. A00OL3A

      Remove the 4 screws and 2 bolts.

    2. A00OI9A

      Remove the 3 screws, 8 bolts and front lower bumper absorber.

  2. REMOVE NO. 1 ENGINE UNDER COVER


    1. A00ON3U

      Remove the 10 clips and under cover.

  3. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A005UNR

      Remove the nut and disconnect the control cable assembly from the control shaft lever.

  4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Disconnect the park/neutral position switch connector.

    2. A005VO7

      Remove the nut, washer and control shaft lever.

    3. A005TGDE02

      Using a screwdriver, bend the tabs of the lock plate.

    4. Remove the lock nut and lock plate.

      Text in Illustration
      *1 Lock Plate
    5. A005U1O

      Remove the 2 bolts and pull out the park/neutral position switch to remove it.