OIL PAN INSTALLATION


  1. INSTALL TRANSAXLE OIL PAN SUB-ASSEMBLY

    A00OMXRE01

    1. Install the 3 magnets to the oil pan.

      Text in Illustration
      *1 Magnet

    2. Install a new gasket to the oil pan.

    3. A00ON6O

      Install the oil pan to the transaxle with the 19 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      Completely remove any oil or grease from the contact surface of the transaxle case and oil pan sub-assembly with gasket before installation.

  2. INSTALL NO. 1 TRANSMISSION OIL FILLER TUBE


    1. Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the oil pan.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

  3. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID


    1. Add continuously variable transaxle fluid Click here.

  4. INSPECT FOR OIL LEAK

  5. INSTALL REAR ENGINE UNDER COVER LH


    1. Install the under cover LH with the 5 clips.

  6. INSTALL NO. 1 ENGINE UNDER COVER


    1. A00ON3U

      Install the under cover with the 10 clips.

  7. INSTALL FRONT LOWER BUMPER ABSORBER


    1. A00OI9A

      Install the front lower bumper absorber with the 3 screws and 8 bolts.

    2. A00OL3A

      Install the 4 screws and 2 bolts.